热处理对激光增材制造Ti2AlNb基合金组织及性能的影响

利用激光增材制造技术制备出Ti-22Al-25Nb合金薄壁试样,分析了沉积态和热处理态试样的宏观形貌、相组成和显微组织,以及不同制度热处理态试样的组织和室温拉伸性能.结果表明,沉积态试样相组成沿沉积高度方向呈现由B2+O+α2→B2+O→B2的变化趋势;热处理态试样的微观组织和相组成均匀,由B2、O、α23相组成;经930℃保温2h空冷的固溶处理和800℃保温24h空冷的时效处理后,合金室温拉伸性能好,抗拉强度为1017MPa,断后伸长率为6.0％.     

航空发动机叶片关键制造技术研究进展

以金属和复合材料航空发动机叶片为研究对象,论述、分析了航空发动机叶片制造采用的加工工艺及关键制造技术,并对其优缺点及发展趋势进行了简要分析。     

零件表面微观工艺特征性研究 ——产品(零件)工艺技术基础科学问题机理探索

通过研究产品(零件)制造过程、方法、参数等工艺因素,给零件表面及表层带来(留下)特有的微观特征性,首次在高精度惯性仪表和高可靠电磁继电器(机电类)产品制造体系中引入了零件表面微观工艺特征性概念,提出了制造阶段的产品工艺可靠性设计和微观工艺特征(性)分析方法,提出了该类产品制造中的工艺设计更应该关注零件与产品设计原理匹配性和性能特性符合性观点,提出零件制造要从单纯的控制几何精度向控制性能特性转变,从宏观、单一采标的几何参数评价向微观、综合采标的非几何(非尺寸)参数评价模式为主转变的建议.零件表面存在的这种微观特征现象与零件几何精度一样,将对产品制造的合格率、稳定性、可靠性的实现起到至关重要的作用,尤其对产品的合格率影响极大,有必要开展更深入、更系统的研究,以建立起我国自主的高端产品(或零件)制造基准工艺平台.     

民机制造环节的重量控制和减重措施研究

重量控制贯穿民用飞机从设计、制造到运营的全生命周期。尽管飞机重量的决定性因素主要在设计环节,但从国内外飞机制造商的经验来看,在飞机量产阶段仍有优化的余地。对国内外飞机制造商在飞机制造环节的减重经验进行总结,并重点阐述波音公司在制造过程中的重量预警项目（Manufacturing Weight Awareness Process,简称MWAP）,以期有所启发。     

基于冷态叶型生成叶片加工坐标的方法

建立了基于冷态叶型生成叶片加工坐标的方法,包括排序、插值加密、叠加位移量、去倒圆及端区叶型拟合等步骤.以某多级轴流压气机为例,应用该方法生成的加工坐标叶片除端区外主流通道叶高内误差在0.01mm以下,叶片表面波纹度和前后缘曲率良好.通过进口级的数值模拟表明:该方法生成的加工坐标叶片与冷态叶型的误差对气动性能影响小,流量-总压比-等熵效率特性变化微小,叶片进出口气流速度、方向及流场细节等变化较小,满足工程应用的需求.      

选区熔化过程多尺度多物理场建模研究进展

选区熔化技术是一种基于粉末床的、能够精确成形复杂零件、调控微观组织和性能的金属增材制造技术,其成形过程的计算机模拟对于生产实践具有重要指导意义。综述了国内外的研究现状,首先介绍选区熔化技术的原理及其特点;然后介绍国内外对选区熔化过程已经开展的计算机模拟技术的研究进展;并进一步重点介绍针对电子束选区熔化过程的多尺度多物理场模型,主要包括:(1)微观尺度电子束与材料相互作用的能量吸收模型;(2)细观尺度从铺粉到粉末加热、熔化、流动、沉积成形全过程的模型;(3)宏观尺度零件成形过程模型。     

复杂曲面零件散乱点云特征点提取

复杂曲面零件的几何特征提取对加工质量的检测及逆向重构具有重要意义。提出了一种复杂曲面零件散乱点云特征点提取方法。首先,提出了基于高斯权重的邻域主成分分析的方法,通过估计每一点邻域的局部变化程度对点云模型进行初始标记;然后,采用基于标记的自动识别法实现特征点的提取;最后,通过特征点聚类的方式去除了特征点集中的异常点,完善了提取的点云特征。该方法直接操作于散乱点云,无需任何的拓扑连接信息。试验结果表明:该方法简单、有效,不需要过多地人为调节参数,特征点提取完整。     

Satellite and ground detection of very dense smoke clouds produced on the islands of the Paraná river delta that affected a large region in Central Argentina

Intense fires were produced on the Paraná river delta islands, Argentina, during most part of 2008, by a combination of an exceptionally dry period and the farmers’ use of a fire land-cleaning technique. In April 2008, those fires significantly affected the nearby regions and their inhabitants, from Rosario city to Buenos Aires mega-city. In this work we present satellite as well as ground Aerosol Optical Depth (AOD) at 550 nm data obtained during the propagation of pollution clouds to the central zone of Argentina. The highest value (1.18) was registered at Buenos Aires by atmospheric remote sensing, using the satellite instrument MODIS/Terra on April 18th 2008 at 10:35 local time (= UT − 3 h). On the same day, ground air quality detectors also measured in this city the highest Total Suspended Particle (TSP) value of the month, 2.02 mg/m³. The AOD(550) daily variation at Rosario Astronomical Observatory, which is located near the Paraná riverside, was derived by combining solar ultraviolet erythemal irradiance data (measured with a YES biometre) with model calculations. On April 25th 2008, from 12:00 to 15:30 local time, a rather high and constant AOD(550) value was registered, with a mean value of (0.90 ± 0.21). Cities located on the side of the Rosario–Buenos Aires highway (San Nicolás, Baradero and San Pedro) were also affected, showing a mean AOD(550) between the Rosario and Buenos Aires values. The particulate matter was collected with gridded samplers placed on the Paraná river islands as well as at the Rosario Observatory. They were analysed with a Scanning Electron Microscope (SEM) and mainly showed a biological origin. Even if normally large particles travel small distances from the source, organic aerosol in the range of 40–100 μm and complex asymmetric structures were registered several kilometres away from the aerosol sources on the islands. Another event of intense UV index attenuation (98.6%) occurred on September 18th 2008, due to very dense smoke clouds that extended over the Rosario area for several hours. The clouds were driven away from the fires by East–northeast and East–southeast winds. The minimum value of this index measured around noon allows to derive a maximum AOD(550)_max = (3.65 ± 0.90) at 12:45 local time. Soot clouds extended over the Paraná river, transporting Burned Biomass Debris (BBD) that deposited on Rosario. In particular, burned leaves and small branches with dimensions of 1–20 cm were collected. The mean (BBD) particles deposited on the ground from 7:00 to 19:00 local time were (0.92 ± 0.20) BBD/(m² h).     

机床组合夹具设计仿真平台在《机械制造技术基础》课程教学中的应用

本文针对传统的机械制造技术基础教学环节中存在的一些问题,提出了用VB（Visual Basic）对Solid-Works开发的机床组合夹具仿真平台进行辅助教学,并介绍了该仿真平台的设计和实现过程及使用和教学效果。     

敏捷制造模式下的质量保证信息系统

客户驱动的动态的全球市场及地理上分布的合作伙伴给开发敏捷制造模式下的质量保证信息系统(QAIS)带来了新的挑战,本文先对敏捷制造模式下的QAIS进行了需求分析,提出了新的分布式QAIS的实现框架,利用当前迅速发展的信息技术,建立了QAIS的开发环境并对有关关键技术进行了初步研究,最后开发完成了一个基于Web的QAIS原型系统.